Taurus AWD V6-3.5L (2009)
Cruise Control Switch: Service and Repair
Speed Control Switch
Speed Control Switch
Removal and Installation
NOTE: The speed control switch is unique to the adaptive cruise control system. When installing a new speed control switch, make sure the correct
switch for adaptive cruise control is installed.
1. Remove the driver air bag module.
2. Remove the 4 screws and the steering wheel bezel box.
3. Remove the speed control switch and bezel.
-
Disconnect the electrical connector.
4. Remove the 2 screws and the speed control switch.
5. To install, reverse the removal procedure.