Taurus AWD V6-3.5L (2009)
55. Connect the fuel efficient power steering system solenoid electrical connector.
56. Connect the RH CMS electrical connector.
57. NOTICE: If the engine is repaired or replaced because of upper engine failure, typically including valve or piston damage, check the
intake manifold for metal debris. If metal debris is found, install a new intake manifold. Failure to follow these instructions can result in
engine damage.
Using a new gasket, install the upper intake manifold and the 6 bolts.
-
Tighten in the sequence shown to 10 Nm (89 lb-in).
58. Install the fuel tube bracket bolt to the upper intake manifold and install the wiring harness pin-type retainer.
-
Tighten to 6 Nm (53 lb-in).