Taurus AWD V6-3.5L (2009)
Installation
WARNING: Do not smoke, carry lighted tobacco or have an open flame of any type when working on or near any fuel-related component.
Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in serious personal injury.
NOTICE: During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while
cleaning gasket surfaces that enters the oil passages, coolant passages or the oil pan, may cause engine failure.
61. Connect the Throttle Body (TB) electrical connector.
62. Connect the PCV hose to the PCV valve.
63. Raise the engine and transaxle assembly into the vehicle.
64. Install the engine mount and the 3 bolts.
-
Tighten to 90 Nm (66 lb-ft).
65. Install the 4 engine mount nuts.
-
Tighten to 63 Nm (46 lb-ft).