Taurus AWD V6-3.5L (2009)
Valve Cover - RH (View 2 of 2)
Removal
NOTICE: During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while
cleaning gasket surfaces that enters the oil passages, coolant passages or the oil pan, may cause engine failure.
1. Remove the RH ignition coils.
2. Detach and disconnect the RH CMS electrical connector.
3. Detach and disconnect the RH Heated Oxygen Sensor (HO2S) electrical connector.
4. Disconnect the RH Variable Camshaft Timing (VCT) solenoid electrical connector.