Taurus AWD V6-3.5L (2009)
Exhaust Pipe: Service and Repair
Exhaust Intermediate Pipe
Exhaust Intermediate Pipe
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove and discard the 2-exhaust Y-pipe flange nuts.
-
Discard the gasket.
-
To install, tighten to 40 Nm (30 lb-ft).
3. Loosen the Torca(R) clamp nut.
-
To install, tighten to 55 Nm (41 lb-ft).
4. Separate the exhaust intermediate pipe from the muffler and tailpipe and remove the exhaust intermediate pipe.
5. To install, reverse the removal procedure.
-
Always install new gaskets and exhaust fasteners.
6. Start the engine and check for exhaust leaks.
