ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2724 > < Initial Inspection and Diagnostic Overview|Page 2722
Page 52
background image

-

Is the resistance less than 5 ohms?

Yes

GO to S16.

No

CONNECT the battery ground cable. GO to S34.

-------------------------------------------------
S16 CHECK THE HS-CAN (+) AND HS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE IC DISCONNECTED

-

Disconnect: IC C220.

-

Measure the resistance between the DLC C251-6, circuit VDB04 (WH/BU), harness side and the DLC C251-14, circuit VDB05 (WH), harness
side.

-

Is the resistance less than 5 ohms?

Yes

GO to S17.

No

CONNECT the battery ground cable. GO to S35.

-------------------------------------------------
S17 CHECK THE HS-CAN (+) AND HS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE RCM DISCONNECTED

-

Disconnect: RCM C310b.

-

Measure the resistance between the DLC C251-6, circuit VDB04 (WH/BU), harness side and the DLC C251-14, circuit VDB05 (WH), harness
side.

-

Is the resistance less than 5 ohms?

Yes

GO to S18.

No

CONNECT the battery ground cable. GO to S36.

-------------------------------------------------
S18 CHECK THE HS-CAN (+) AND HS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE OCCUPANT CLASSIFICATION
SYSTEM MODULE (OCSM) DISCONNECTED

Initial Inspection and Diagnostic Overview|Page 2724 > < Initial Inspection and Diagnostic Overview|Page 2722