Taurus AWD V6-3.5L (2009)
11. NOTE: Make note of the routing and the opening that the pressure sensor and hose are fed through on the seat cushion support assembly for
installation purposes.
Remove the OCS bladder, hose and pressure sensor from the seat cushion frame.
12. Remove the rivets and the OCSM from the seat cushion frame bracket.
Installation
1. Bend the retaining tab back on the pressure sensor bracket.
2. NOTE: The OCSM must be correctly positioned and securely riveted in place. Failure to do so may set a DTC in the RCM.
Install the OCSM and rivets to the seat cushion frame bracket.
3. Connect the OCSM electrical connector.