Taurus AWD V6-3.5L (2009)
5. Subtract measurement 3 from measurement 2 to obtain the front ride height.
-
Refer to Specifications.
Rear Ride Height Measurement
All-Wheel Drive (AWD)
Front Wheel Drive (FWD)
NOTE: Make sure that the vehicle is positioned on a flat, level surface and the tires are inflated to the correct pressure. The vehicle should have a full
tank of fuel.
1. Measure the distance between the flat level surface and the center of the lower control arm-to-subframe bolt (measurement 2).
2. Measure the distance between the same flat level surface and the center of the lower arm-to-knuckle bolt (measurement 3).
3. Subtract measurement 3 from measurement 2 to obtain the rear ride height.
-
Refer to Specifications.