Taurus AWD V6-3.5L (2009)
![background image](/ford/taurus_awd/v6-3.5l/Page-1580001.png)
Steering Control Module: Service and Repair
Steering Effort Control Module (SECM)
Removal and Installation
NOTE: The right side lower instrument panel cover has been removed for clarity. The Steering Effort Control Module (SECM) is located on a bracket
behind the carpet between the firewall and right side kick panel.
1. Position the carpet aside.
2. Disconnect the 2 Steering Effort Control Module (SECM) electrical connectors.
3. Remove the 2 nuts and the SECM.
-
To install, tighten to 4 Nm (35 lb-in).
4. To install, reverse the removal procedure.