Taurus AWD V6-3.5L (2009)
9. Tighten the main control cover bolts in the sequence shown.
-
Tighten to 12 Nm (106 lb-in).
10. Wipe the surface of the existing solenoid body strategy tag on top of the transaxle case clean and install the new solenoid body strategy tag
(supplied with the solenoid body service kit) over it.
11. Position the transmission fluid cooler thermal bypass valve and transmission fluid cooler tube assembly in place and install the thermal bypass
valve nuts.
-
Tighten to 9 Nm (80 lb-in).
12. Connect the transaxle electrical connector and install the wiring harness fastener on the main control cover stud.