Taurus X AWD V6-3.5L (2009)
Air Bag Deactivation Indicator: Service and Repair
Passenger Air Bag Deactivation (PAD) Indicator - Taurus X
Removal and Installation
NOTE: The air bag warning indicator illuminates when the correct Restraints Control Module (RCM) fuse is removed and the ignition switch is ON.
NOTE: The Supplemental Restraint System (SRS) must be fully operational and free of faults before releasing the vehicle to the customer.
1. Depower the SRS. For additional information, refer to Supplemental Restraint System (SRS) Depowering and Repowering See: Dashboard /
Instrument Panel/Air Bag(s) Arming and Disarming/Service and Repair/Supplemental Restraint System (SRS) Depowering and Repowering.
2. Gently pull outward to release the clips on the instrument panel center finish panel.
3. Disconnect the Passenger Air Bag Deactivation (PAD) indicator electrical connector.
4. Remove the 2 screws and PAD indicator.
5. To install, reverse the removal procedure.
6. Repower the SRS. For additional information, refer to Supplemental Restraint System (SRS) Depowering and Repowering See: Dashboard /
Instrument Panel/Air Bag(s) Arming and Disarming/Service and Repair/Supplemental Restraint System (SRS) Depowering and Repowering.
