Taurus X FWD V6-3.5L (2008)
Alarm System Transmitter: Service and Repair
PASSIVE ANTI-THEFT SYSTEM (PATS) TRANSCEIVER
Removal and Installation
1. Remove the steering column cover.
2. Remove the 3 screws and the lower steering column shroud.
3. Disconnect the PATS transceiver electrical connector.
4. Release the tabs and remove the PATS transceiver.
5. NOTE: Replacement of the PATS transceiver does not require the PATS keys to be programmed into the instrument cluster (IC) again.
To install, reverse the removal procedure.
