Taurus X FWD V6-3.5L (2008)
DVD Player: Service and Repair
DIGITAL VERSATILE DISC (DVD) PLAYER
Removal
NOTE: Programmable module installation (PMI) only needs to be carried out if the DVD player is being replaced.
1. Upload the DVD player configuration to the scan tool.
2. NOTE: Open the DVD player display.
Remove the 4 screws.
3. Remove the DVD player.
-
Pull down on the sides of the DVD player to disengage the clips from the bracket.
-
Using a suitable tool, push the rear most U-hook forward and release the U-hooks.
-
Hang the DVD player on the J-hooks and disconnect the electrical connector.
-
Remove the DVD player from the J-hooks.
Installation
1. Hang the DVD player on the J-hooks.
2. Connect the electrical connector.
3. Remove the DVD player from the J-hooks.
4. NOTE: Tilt the DVD player, as necessary, to align it correctly.
