Taurus X FWD V6-3.5L (2008)
refer to Principles of Operation. See: Initial Inspection and Diagnostic Overview/Smart Junction Box (SJB)/Principles of Operation
-
DTC B106F (Module Disabled Due to External Fault) - sets when one or more output functions are permanently disabled due to a repetitive circuit
overload fault. DTC B106F will be set with DTC B106E. When DTC B106F is present, the SJB must be replaced after the fault condition has
been corrected.
This pinpoint test is intended to diagnose the following:
-
Output circuit short to ground or voltage
-
SJB
A1
A2