Taurus X FWD V6-3.5L (2008)
Taurus X
Special Tool(s)
Special Tool(s)
Removal and Installation
1. Remove the rear bumper cover.
2. NOTE: Anytime the rear bumper nuts are removed, it is necessary to re-tighten the rear bumper double-ended studs.
Remove the 4 rear bumper nuts.
-
To install, tighten the rear bumper nuts to 23 Nm (17 lb-ft).
-
To install, tighten the rear bumper double-ended studs to 12 Nm (9 lb-ft).