Taurus X FWD V6-3.5L (2008)
3. NOTE:
-
Make sure the arrow on the special tool is visible on the bottom and facing away from the subframe. The arrow must remain straight so that the
bushings are correctly indexed into the subframe.
-
When installing the RDU bushing, 204-616/2 will fall away as the RDU bushing is installed into the subframe. The special tool does not
control the depth of the bushing. The RDU bushing is fully seated when the special tool falls away from the subframe, do not continue to
tighten the special tool.
Install the RDU bushing into the subframe.
4. Install the rear drive unit.
