Taurus X FWD V6-3.5L (2008)
Disconnect the battery ground cable and wait at least one minute.
7. Remove the driver air bag module.
8. Open the glove compartment door.
9. Release the dampening strut from the LH side of glove compartment door and lower door fully.
10. NOTE:
-
Taurus X shown, Taurus and Sable similar.
-
RH shown, LH similar.
Through the glove compartment opening, disconnect the 2 passenger air bag module electrical connectors.
11. From under the rear of the passenger seat, slide and disengage the passenger seat side air bag module electrical connector locking clip, and then
release the tab and disconnect the passenger seat side air bag module electrical connector.
12. From under the rear of the driver seat, slide and disengage the driver seat side air bag module electrical connector locking clip, and then release
the tab and disconnect the driver seat side air bag module electrical connector.
Taurus X safety canopy modules
13. Release and position aside the driver side D-pillar trim panel.
