Taurus X FWD V6-3.5L (2008)
Taurus X (Part 2)
Removal and Installation
1. Remove the C-pillar trim screw cover.
2. Remove the C-pillar trim screw.
3. Remove the second row safety belt anchor-to-floor bolt.
-
To install, tighten to 40 Nm (30 lb-ft).
4. Remove the C-pillar trim panel.
-
Pull the C-pillar trim panel toward the inside of the vehicle to release the retaining clips.
5. To install, reverse the removal procedure.
B-Pillar Trim Panel
B-PILLAR TRIM PANEL
Exploded View