Taurus X FWD V6-3.5L (2008)
12. Release the hook-and-loop strip, and carefully roll up the backrest trim cover and remove the third row of hog rings in front.
13. Release the hook-and-loop strips in front, roll the backrest trim cover up and remove the hog rings at the back.
14. NOTE: The head restraint guides are not interchangeable.
Release the tabs and remove the head restraint guides.
15. Remove the backrest trim cover.
16. NOTE: Vehicles with manual lumbar adjust shown.
Remove the hog rings attaching the lumbar basket (if equipped) or backrest support (if equipped) and backrest foam pad to the backrest frame.
17. Remove the backrest foam pad.
18. NOTE: Note the routing of the side air bag module wiring for installation.
Release the 3 side air bag harness pin-type retainers and remove the nuts and the side air bag module with wire harness.
