Taurus X FWD V6-3.5L (2008)
12. Install the third row of hog rings in front and attach the hook-and-loop strips.
13. Roll down the backrest trim cover to the side air bag module.
14. WARNING:
-
Check the seat side air bag deployment chute for damage. The deployment chute must not be repaired. If there is any damage to the
deployment chute, a new seat back trim cover and deployment chute must be installed as a unit. Failure to follow these instructions
may result in the seat side air bag module deploying incorrectly and increase the risk of serious personal injury or death in a crash.
-
Before installing the seat side air bag module/deployment chute assembly:
-
Inspect the side air bag module and mounting surfaces for any damage or foreign material.
-
Remove any foreign material from the mounting surfaces of the deployment chute, the seat backrest frame mounting bracket and
the air bag module cavity in the seat backrest foam pad.
-
Install new parts if damaged.
Failure to follow these instructions may result in the seat side air bag deploying incorrectly, which increases the risk of serious personal
injury or death in a crash.
Feed the side air bag module backrest trim cover chute and J-clip retainer back through the side air bag module backrest foam pad opening.
15. Install the side air bag module backrest trim cover chute and J-clips around the side air bag module and backrest frame. Attach the chute J-clips.
16. Attach the J-clips at the back of the backrest trim cover.
