Taurus X FWD V6-3.5L (2008)
4. CAUTION: Use care when separating the seat backrest trim cover from the hook-and-loop strip or the hook-and-loop strip may be torn
from the seat backrest foam.
Release the backrest trim cover lower J-clips and hook-and-loop strips.
5. Place a hand between the backrest trim cover and backrest foam pad and carefully separate the hook-and-loop strips, then carefully roll up the
backrest trim cover in an inside out fashion to the first row of hog rings in the front.
-
On passenger seats, pull the backrest latch fold-flat release strap through the backrest trim cover bezel opening.
6. Remove the first row of hog rings in the front.
7. Release the hook-and-loop strip, invert the trim cover and remove the second row of hog rings in the front.
8. Release the J-clips at the back of the backrest trim cover.
9. Release the side air bag module backrest trim cover chute J-clip from around the side air bag module.
10. Feed the side air bag module backrest trim cover chute and J-clip retainers out through the side air bag module backrest foam pad opening.
11. Release the hook-and-loop strips in front, invert the backrest trim cover and remove the hog rings at the back.
