Taurus X FWD V6-3.5L (2008)
46. NOTE: RH shown, LH similar.
Remove and discard the upper stabilizer link nuts.
47. NOTE: The hex holding feature can be used to prevent turning of the stud while removing the nuts.
NOTE: RH shown, LH similar.
Remove and discard the tie-rod end nuts.
^
Separate the tie-rod ends from the wheel knuckles.
48. NOTE: RH shown, LH similar.
Remove and discard the lower ball joint-to-wheel knuckle nuts.
^
Separate the ball joints from the wheel knuckles.
