Taurus X FWD V6-3.5L (2008)
RH camshafts
4. CAUTION: The camshafts must remain in the neutral position during removal or engine damage may occur.
NOTE: Coat the camshafts with clean engine oil prior to installation.
Position the camshafts onto the RH cylinder head in the neutral position as shown.
5. NOTE: Cylinder head camshaft bearing caps are numbered to verify that they are assembled in their original positions.
Install the 8 camshaft caps and the 16 bolts.
^
Tighten in the sequence shown to 10 Nm (89 lb-in).
