Taurus X FWD V6-3.5L (2008)
37. Using the special tool, install the crankshaft pulley washer and new bolt and tighten in 4 stages.
^
Stage 1: Tighten to 120 Nm (89 lb-ft).
^
Stage 2: Loosen one full turn.
^
Stage 3: Tighten to 50 Nm (37 lb-ft).
^
Stage 4: Tighten an additional 90 degrees.
38. Install the accessory drive belt tensioner and the 3 bolts.
^
Tighten to 10 Nm (89 lb-in).
39. Install the power steering pump and the 3 bolts.
^
Tighten to 25 Nm (18 lb-ft)...