Taurus X FWD V6-3.5L (2008)
Part 2
Removal and Installation
1. Remove the exhaust flexible pipe.
2. CAUTION: The special tool must be carefully aligned to the mounting bosses on the oil pan. Failure to follow these instructions may
result in damage to the oil pan.
Position a floor jack and the special tool under the oil pan.
3. Remove the engine coolant degas bottle.
4. Remove the nut, bolt and engine mount brace.
^
To install, tighten to 20 Nm (15 lb-ft).
5. Remove the 4 engine mount nuts.
^
To install, tighten to 63 Nm (46 lb-ft).
6. Remove the 4 engine mount studs.
^
To install, tighten to 18 Nm (13 lb-ft).
7. Remove the 3 bolts and the engine mount.
^
To install, tighten to 90 Nm (66 lb-ft).
8. To install, reverse the removal procedure.
