Taurus X FWD V6-3.5L (2008)
2. NOTE: The oil pan and the 4 specified bolts must be installed within 4 minutes of the start of sealant application.
Install the oil pan and bolts 10, 11, 13 and 14.
^
Tighten in the sequence shown to 3 Nm (27 lb-in).
^
Loosen the bolts 180 degrees.
3. Align the oil pan to the cylinder block and A/C compressor.
^
Position the oil pan so the mounting boss is against the A/C compressor and using a straightedge, align the oil pan flush with the rear of the
