ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

A/T - Harsh Engagement/No Shift/Multiple DTC's|Page 3546 > < A/T - Harsh Engagement/No Shift/Multiple DTC's
Page 2
background image

2.

To repair an OSS or TSS DTC refer to WSM, Section 307-01, follow pin point test (PPT) C. The TSS sensor is located in the end cover assembly
(Figure 1). The OSS sensor is located inside the transaxle under the main Control (Figure 2). Both sensor connectors are plugged into the solenoid
body. Both sensor connectors look the same but are wired differently (Figure 3).

3.

If you work through PPT C and get to Step C9 before finding the cause of the concern, replace the sensor (DO NOT REPLACE THE
POWERTRAIN CONTROL MODULE (PCM) AT THIS TIME). Reassemble as needed and verify the concern is fixed.

Parts Block

WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage And Emissions Warranty Coverage
IMPORTANT:

Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the
identified causal part.

A/T - Harsh Engagement/No Shift/Multiple DTC's|Page 3546 > < A/T - Harsh Engagement/No Shift/Multiple DTC's