Taurus X FWD V6-3.5L (2008)
15. Remove the rivets and the OCSM from the seat cushion frame bracket.
Installation
NOTE: If installing an OCS service kit, refer to Occupant Classification Sensor - Service Kit. See: Occupant Classification Sensor - Service Kit
All seats
1. Bend the retaining tab back on the pressure sensor bracket.
2. NOTE: The OCSM must be correctly positioned and securely riveted in place. Failure to do so may set a DTC in the RCM.
Install the OCSM and rivets to the seat cushion frame bracket.
3. Connect the OCSM electrical connector.