Taurus X FWD V6-3.5L (2008)
13. CAUTION: Inspect the 20-pin solenoid body connector seal to make sure that the seal is on the inside of the main control cover.
Transmission fluid leak will occur.
NOTE: Install the studbolts in the locations noted during disassembly.
Install the main control cover and loosely install the 14 bolts.
1
Bolt location
2
Studbolt location
14. Tighten the main control cover bolts in the sequence shown.
^
Tighten to 12 Nm (9 lb-ft).
