Taurus X FWD V6-3.5L (2008)
Seals and Gaskets: Service and Repair
Halfshaft Seal - LH
Halfshaft Seal - LH
Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the front LH halfshaft.
3. Inspect the halfshaft hub for wear or damage and install a new halfshaft if necessary.
1
Inspect the differential seal surface.
2
Inspect the halfshaft bushing surface. If this surface is damaged, inspect the halfshaft bushing for damage.
3
Inspect the differential side gear splines.
4. Using a suitable awl, poke a small hole in the halfshaft seal.