ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

A/T - Harsh Engagement/No Shift/Multiple DTC's|Page 4477 > < Transmission Position Switch/Sensor, A/T|Service and Repair|Page 4468
Page 1
background image

Transmission Speed Sensor: Customer Interest
A/T - Harsh Engagement/No Shift/Multiple DTC's

TSB 07-21-11

10/29/07

6F50 TRANSAXLES BUILT PRIOR TO 10/21/2007 - 
DTC P0715, P0717, P0718, P0720, P0721, P0722
AND/OR HARSH ENGAGEMENT, NO UPSHIFT, FIFTH
GEAR ONLY

FORD:
2008 Taurus X, Taurus
2007-2008Edge

LINCOLN:
2007-2008 MKX

MERCURY:
2008 Sable

This article supersedes TSB 07-3-11 to update the transaxle built date coverage and Part List.

ISSUE
Some 2007-2008 Edge and MKX, 2008 Taurus Taurus X, and Sable vehicles equipped with a 6F50 transaxle with a build date prior to 10/21/2007, with
any Output Shaft Speed (OSS) sensor or Turbine Shaft Speed (TSS) sensor diagnostic trouble code(s) (DTCs) P0715, P0717, P0718, P0720, P0721,
P0722 and/or harsh engagements, no upshift, fifth gear only, could have an intermittent short in the OSS or TSS sensor.

ACTION
Follow the Service Procedure steps to correct the condition.

SERVICE PROCEDURE

1.

If any DTCs related to OSS or TSS are present, check the transaxle build date following Workshop Manual (WSM), Section 307-01.

a.

If the build date is before 10/21/2007 go to Step 2.

b.

If vehicle transaxle is built on or after 10/21/2007 do not continue with this TSB and follow normal WSM, Section 307-01 Automatic
Transaxle/Transmission-6F50 Diagnosis and Testing.

A/T - Harsh Engagement/No Shift/Multiple DTC's|Page 4477 > < Transmission Position Switch/Sensor, A/T|Service and Repair|Page 4468