Taurus X FWD V6-3.5L (2008)
8. NOTE: If the door window regulator motor is inoperative, remove it.
Lower the window until the glass clamp bolt is accessible through the access hole plug, then loosen the glass clamp bolt.
-
To install, tighten to 9 Nm (80 lb-in).
9. Tape the window glass in position.
10. Disconnect the 5 wiring harness retainers and the wiring harness grommet.
11. Remove the interior door handle bolt.
-
To install, tighten to 7 Nm (62 lb-in).