Taurus X FWD V6-3.5L (2008)
Windshield: Procedures
GLASS RESEAL - WINDSHIELD
Material
Material
1. Remove the cowl panel grille.
2. Position the LH and RH weatherstrips aside.
3. Remove the LH and RH A-pillar trim panels.
4. Remove the LH and RH sun visors.
5. If equipped, remove the overhead console.
6. Remove the LH and RH assist handle.
7. Lower the front portion of the headliner and block with a suitable material.
8. Clean the interior and exterior of the windshield glass surface with glass cleaner.
9. Cut the urethane adhesive applicator tip to 6 mm (0.24 in).
