Taurus X FWD V6-3.5L (2008)
Washer Pump And Reservoir
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the RH front fender splash shield.
3. WARNING: Carefully read cautionary information on product label. For EMERGENCY MEDICAL INFORMATION seek medical
advice. Failure to follow these instructions may result in serious personal injury.
NOTE:
-
When installing a new windshield washer pump, be careful not to damage the rubber grommet.
-
To prevent spilling windshield washer fluid, drain the windshield washer reservoir before washer pump removal.
Remove the windshield washer pump.
-
Disconnect the electrical connector.
-
Disconnect the hoses.
-
Remove the windshield washer pump.
4. CAUTION: Do not operate the windshield washer pump prior to filling the windshield washer reservoir. Failure to follow this
instruction may result in premature pump failure.
To install, reverse the removal procedure.
-
Fill the windshield washer reservoir with windshield washer fluid.
