ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Paint - Cosmetic Surface Service Procedures|Page 4984 > < Paint - Cosmetic Surface Service Procedures|Page 4982
Page 2
background image

NOTE:
IF PAINT WAS REMOVED DURING TAPE TEST, THE ENTIRE CLEARCOAT AND BASECOAT SHOULD BE REMOVED FROM THE
PANEL.

3.

Wipe down the areas to be repainted with wax and grease remover.

^

BASF product # 900 PreKleano or equivalent

4.

Sand the affected surface with 150/240 grit sand paper. Remove only clearcoat and colorcoat, featheredge areas with 320 grit paper.

NOTE:
DO NOT REMOVE SPRAY PRIMER OR E-COAT.

5.

Blow off the area to remove loose dust or debris.

6.

Wipe the sanded surface with wax or grease remover.

^

BASF product # 901 Prekleano or equivalent

7.

Tack off area.

8.

Mix and apply one coat of epoxy primer for adhesion and let dry per manufacturer's label instruction (20 - 30 minutes).

^

BASF product # DE 15, PA16, PR80 or equivalent

NOTE:
DO NOT SAND THE NEWLY PRIMED AREAS.

9.

Mix and apply two coats of the appropriate colored primer surface sealer.

^

BASF product # DP 21, Solo Color 1:1, then 2 parts of mixture 1 part DH 60, 30% PR80 or equivalent.

10.

Mix and apply 2 coats or until hiding of basecoat per manufacturer's label instructions. Apply first coat to repair area only. Apply second coat over
entire area. Allow a minimum of 15 minutes flash time before applying the clearcoat.

^

BASF # Diamont Basecoat Color and Diamont Reducer 1:1 or equivalent.

11.

Mix and apply 2 coats of urethane clearcoat per manufacturer's label instructions.

^

BASF product # DC90 Diamond Clear, LH50 Diamond Hardener 2:1 or equivalent.

12.

Polish if necessary.

13.

Clean and detail the vehicle and return it to the customer.

WARRANTY STATUS: INFORMATION ONLY

OASIS CODES: 106000

Technical Service Bulletin # 83224

Date: 831101

Roof/Door - Paint Chipping

Article No. 83-22-4

PAINT - ROOF PANEL OR DOOR CHIPPED DUE TO DOOR OVERSLAM

FORD 1983-84 T-BIRD; 1984 TEMPO

LINCOLN-MERCURY 1983-84 COUGAR; 1984 TOPAZ

To correct concerns of paint chipping on the roof panel and upper rear corner of door panel, it is necessary to replace the door opening weatherstrip with
new, improved parts.

Paint - Cosmetic Surface Service Procedures|Page 4984 > < Paint - Cosmetic Surface Service Procedures|Page 4982