ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

All Technical Service Bulletins for Suspension Strut / Shock Absorber: > < Front Suspension - Rubbing/Scraping Noise
Page 1
background image

Suspension Strut / Shock Absorber: Customer Interest
Suspension - Clunking Noise Form Front End

Article No. 84-8-5

NOISE - CLUNKING/RATCHETING - FRONT SUSPENSION, DURING LOW SPEED TURNING, VEHICLES BUILT PRIOR TO 2/13/84

FORD 1984 TEMPO

LINCOLN-MERCURY 1984 TOPAZ

If clunking/ratcheting noise is heard in the front suspension coil spring area during low speed turning maneuvers, the noise may be caused by the upper
mount bearing. This condition can be verified by turning the steering wheel with the vehicle in stationary position. To service this condition, replace the
strut upper mount bearing, (Part Number E43Z-3B455-C), and the spring insulator, (Part Number E43Z-5415-A), by following the procedure outlined in
the 1984 Tempo/Topaz Car Shop Manual, Section 14-10-5.

PART NUMBER

PART NAME

CLASS

E43Z-3B455-C

Bearing & Seal Assembly

A

E43Z-5415-A

Spring Insulator

B

NOTE:

Insulator will not be available until week of April 23, 1984.

OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual.
OPERATION: 18124A
TIME:

One - 0.6 Hr. Both - 1.0 Hr. DLR. CODING: Basic Part No. 3B455 Code: 56

All Technical Service Bulletins for Suspension Strut / Shock Absorber: > < Front Suspension - Rubbing/Scraping Noise