Tempo L4-140 2.3L HSC (1986)
Water Pump: Service and Repair
Fig. 15 Water pump removal
1.
Disconnect battery ground cable and drain coolant from engine.
2.
Loosen thermactor pump adjusting bolt and remove belt.
3.
Remove thermactor air pump hose clamp, thermactor pump bracket bolts, pump and bracket assembly from engine.
4.
Loosen water pump idler pulley bolt and remove belt from water pump pulley.
5.
Remove water pump inlet tube.
6.
Remove water pump bolts and water pump, Fig. 15.
7.
Reverse procedure to install.
