ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Steering Wheel - Vibration Damper Service Tip|Page 7071 > < Steering Shaft|Removal|Page 7066
Page 1
background image

Steering Wheel: Technical Service Bulletins
Steering Wheel - Vibration Damper Service Tip

Article No. 85-24-4

STEERING WHEEL - VIBRATION DAMPER SERVICE TIP

FORD 1986 ESCORT, TEMPO

LINCOLN-MERCURY 1986 LYNX, TOPAZ

Some vehicles may be equipped with a foam insert as an integral part of the steering wheel. When removing or installing the steering wheel and/or
vibration damper assembly, this foam insert must be installed in the steering wheel using the following procedure.

Removal

1.

Disconnect negative battery ground cable.

Figure 4 - Steering Wheel Assembly

2.

Remove horn pad cover by removing two or four screws from the back of the steering wheel assembly. Figure 4.

Steering Wheel - Vibration Damper Service Tip|Page 7071 > < Steering Shaft|Removal|Page 7066