Tempo L4-140 2.3L HSC (1986)
Figure 13
5.
Refer to Figure 13.
Remove the steering gear tie rod to steering knuckle attaching nut and disengage the tie rod from the steering knuckle using Tool 3290-C with
T81P-3504-W.
Repeat this step on the remaining side.
Figure 14
6.
Refer to Figure 14.
Disengage the control arm from the steering knuckle using a pry bar.
Repeat this step on the remaining side.
CAUTION: DO NOT use a hammer on knuckle to remove ball joints.
