ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Clutch, M/T > < A/T - ATX Shift Problems|Page 6372
Page 1
background image

Valve Body: All Technical Service Bulletins
A/T - Shudder/Boom In Third Gear

TRANSAXLE - ATX - LOW SPEED SHUDDER AND BOOM IN THIRD GEAR

Article No. 88-11-5

FORD:

1986 TEMPO

LINCOLN-MERCURY: 1986 TOPAZ

ISSUE:

A low speed shudder and boom while driving in third gear may be caused by shift point variances in the 2-3 upshift and 3-2 downshift
pattern.

ACTION:

To correct this, install a new design main control service kit that revises the part throttle 2-3 upshift and 3-2 downshift pattern. Refer to the
following service procedure.

1.

Obtain main control service kit, (E6FZ-7A230-A).

FIGURE 5

2.

Replace the 3-2 control valve bore plug and retainer with a 3-2 downshift valve, spring and flat plate retainer. Refer to Steps 1 and 2 of Figure 5
and Section 17-25 of the 1986 Car Shop Manual, Volume E.

3.

Replace the 2-3 spring with a two-spring "Nested" assembly from the kit. Refer to Step 3 of Figure 5.

PART NUMBER

PART NAME

CLASS

E6FZ-7A230-A

Main Control Service Kit

C

OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Eligible Under Basic Warranty and Powertrain Coverages
OPERATION: 881105A
TIME:

2.0 Hrs.

DLR. CODING:

Basic Part No. 7A100
Condition Code: 09

Clutch, M/T > < A/T - ATX Shift Problems|Page 6372