Tempo V6-182 3.0L (1993)
Crankshaft Main Bearing Seal: Service and Repair
1.
Remove transaxle, then the flywheel.
2.
Remove rear cover plate.
3.
Using a suitable tool, punch a hole into the seal metal surface between the lip and block. Using slide hammer T77L-9533-B, or equivalent, remove
seal.
4.
Coat crankshaft seal area and seal lip with engine oil, then using tool T82L-6701-A, install seal.
5.
Install rear cover plate and two dowels.
6.
Install flywheel. Torque bolts to 54-64 ft lb.
