Tempo FWD L4-140 2.3L HSC (1987)
FIGURE 3
4.
Center punch the inner disc brake pad at the inboard and outboard side of the top (leading) end, Figure 3.
5.
If the inner disc brake pad will not seat properly in the steering knuckle abutment opening after it has been center punched, file the edge of the
center punched pad until a total clearance of .006-.012 in. (.015-.030 cm.) is obtained.
OTHER APPLICABLE ARTICLES:
None
WARRANTY STATUS:
Eligible Under Basic Warranty Coverage
OPERATION: 882006A - Both Sides
TIME: 0.9 Hr.
DLR. CODING:
Basic Part No. 2001
Condition Code: 56