Tempo FWD L4-140 2.3L HSC (1987)
Heater Case Assembly.
4. Tighten the two nuts attaching the heater case assembly to the dash panel.
5. Connect the heater hoses to the heater core tubes. Tighten the hose clamps to specification.
6. Fill the cooling system to the proper level with the correct mixture of coolant and water.
7. Install the glove compartment door, liner and hinge bar as outlined.
8. Check the heater for proper operation.
9. Check the coolant level after the engine reaches normal operating temperature. Observe all safety precautions.
