Tempo FWD L4-140 2.3L HSC (1987)
^
Turn all accessories off, check the hardstop RPM (cooling fan off) in Neutral (MTX) or Drive (ATX) for proper RPMs and TV linkage adjustment
(ATX), see chart.
^
If TV linkage, on automatic transmission equipped vehicles, is out of adjustment, adjust using the following procedure before adjusting Hard
Stop-Idle.
-
Loosen the bolt on the sliding trunnion block, on the TV control rod assembly, one turn minimum.
-
Remove any corrosion from the control rod and free-up the trunnion block so that it slides freely on the control rod.