Tempo FWD L4-140 2.3L HSC (1987)
Valve Body: All Technical Service Bulletins
A/T - ATX Main Control Assembly Check Ball Locations
TRANSAXLE - ATX - MAIN CONTROL ASSEMBLY
Article No.
CHECK BALL LOCATIONS - REVISED
87-10-13
SHOP MANUAL INFORMATION
FORD:
1987 ESCORT, EXP, TEMPO, TAURUS
LINCOLN-MERCURY: 1987 LYNX, TOPAZ, SABLE
ISSUE:
The 1987 Car Shop Manual, Volume E, Sections 17-25-83 and 17-25-84 and the 1987 Taurus/Sable Shop Manual, Sections 17-25-75 and
17-25-76 state that the main control assembly (valve body) check ball locations are dependent on model usage. This is not correct.
ACTION:
Please correct your Shop Manual to reflect the proper check ball location:
All 1987 main control assemblies will have a check ball at the center location. The lower check ball location is used on Tempo/Topaz (2.3L)
models only. Tempo/Topaz models will use a total of seven (7) check balls, while all others will have only six (6).
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: "INFORMATION ONLY"
