Thunderbird V6-232 3.8L SC (1989)
Cruise Control Switch: Service and Repair
1.
Pull upward on upper middle edge of the horn cover/pad assembly and separate it from the steering wheel.
2.
Disconnect horn switch electrical connectors from horn cover/pad assembly, then set the assembly aside.
3.
Disconnect electrical connector from the speed control/horn brush contact plate terminal.
4.
On models with standard steering wheel, use your fingers to pry out the speed control switch. Remove switch and harness assembly from
steering wheel.
5.
On models with sport steering wheel, remove four speed control switch retaining screws. Remove switch and harness assembly from steering
wheel.
6.
On all models, reverse procedure to install.
