Thunderbird V6-232 3.8L SC (1989)
Parts Replacement Chart
2. Install a new bolt and hand tighten. Refer to Parts Replacement Chart for part number. Tighten to 30-43 Nm (23-32 lb-ft).
Safety Belt With Anchorage Plate Thread Damage
1. Remove the broken or stripped bolt and discard.
2. Drill out the internal threads in the safety belt anchorage plate with a 27/64-inch drill.
3. Rethread the anchorage plate with a 1/2-13 tap.
4. Blow out the chips.
Parts Replacement Chart
5. Install the attachment parts in the proper sequence using proper service procedures. Install new bolt and hand tighten using proper service
procedures. Original parts are to be replaced with the service parts indicated in the Parts Replacement Chart.