Thunderbird V6-232 3.8L SC (1989)
Power Steering Pump: Service and Repair
Removal and Installation
On Supercharged engines, intercooler and intercooler tubes must be removed to gain access to power steering pump.
1.
On all engines, disconnect return hose from power steering pump reservoir and allow fluid to drain into a suitable container.
2.
Disconnect pressure hose from pump fitting, then remove pump mounting bracket and disconnect drive belt from pulley.
3.
On models w/fixed pump system, remove pulley.
4.
On all models, remove power steering pump.
5.
Reverse procedure to install. Tighten to specifications.
6.
Do not overtighten pressure hose fitting. Swivel and/or end play of the fitting is normal and does not indicate a loose fitting.