ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Ignition Control Module - Connector Update|Page 253 > < Diagram Information and Instructions|Page 247
Page 1
background image

Ignition Control Module: Technical Service Bulletins
Ignition Control Module - Connector Update

Article No. 94-7-8

WIRING - REVISED IGNITION CONTROL MODULE (ICM) CONNECTOR - FORMERLY CALLED ELECTRONIC DISTRIBUTORLESS
IGNITION SYSTEM (EDIS) CONNECTOR - SERVICE TIP

FORD:
1994 CROWN VICTORIA, ESCORT, MUSTANG, TAURUS, THUNDERBIRD

LINCOLN-MERCURY: 
1994 COUGAR, GRAND MARQUIS, MARK VIII, TOWN CAR, TRACER

LIGHT TRUCK:
1994 AEROSTAR, EXPLORER, RANGER

ISSUE:
Beginning 1/3/94 revised design ICM connectors are being used after the old style connectors are exhausted. The revised connector has a new seal and
new design for better retention. Although the connectors are interchangeable, they pull apart differently.

ACTION:
If service is required, be aware of the new design when taking the ICM connector apart.

^

The previous style connector had a split beam that had to be pushed "down" while the connector was being pulled off. The word "PUSH" is
embossed on the end of the split beam, Figure 1.

Ignition Control Module - Connector Update|Page 253 > < Diagram Information and Instructions|Page 247