Thunderbird V8-3.9L VIN A (2002)
11. Install the cabin air filter housing bolts.
12. Install the cross-vehicle support and the seven retaining bolts.
13. Install the cabin air filter.
14. Install the cowl vent screen.
15. Connect the battery ground cable.
16. Connect the scan tool.
17. Select ICM.
18. Select ENTER SECURITY ACCESS. Wait 10 minutes for security access to be granted.
19. Select PARAMETER RESET.
20. Disconnect the scan tool.
21. Place ignition key in the OFF position.
22. Place ignition key in the RUN position.
23. Remove the ignition key.